Top
SCIENCE. STORIES. IMPACT.

iBiology

Bringing the World's Best Biology to You

Light Sources for Microscopy

00:00:11.23 I'd like to show you some of the light sources that we are using
00:00:16.20 nowadays in microscopy. And the very first light source that we don't use
00:00:21.12 anymore on modern microscopes is right outside. The sun has been
00:00:26.18 used for many centuries to illuminate our specimens, often using
00:00:32.08 a little mirror that then directs the sunlight onto the specimen.
00:00:35.21 So that used to be the brightest light source we could find.
00:00:39.03 Nowadays, we're more inside and we're using devices like those standing here.
00:00:45.11 So first of all, here on the left, I have a halogen lamp. The lamp
00:00:53.15 itself is sitting in a lamp house. It is a halogen lamp, very much like
00:00:59.07 what you use at home. We can put a voltage on this, we'll then
00:01:05.07 illuminate -- the spiral here will start glowing, and that light will
00:01:11.12 then through a condenser lens be transmitted into our microscope.
00:01:16.03 So some of the halogen lamp houses have a little mirror sitting here on the back
00:01:21.24 to get more light coming out of the front. Often that's not needed,
00:01:26.00 this lamp house here is just completely black inside and all you get out is the
00:01:33.12 light coming out of the front. Since we have a condenser lens here, in front
00:01:38.05 of the filaments, that lens will make a magnified image of the filament.
00:01:44.00 And I project it here on the whiteboard, and so that image of the filament,
00:01:49.11 it's the image of our light source, is something you will also encounter in
00:01:54.16 various positions throughout the microscope. Now halogen lamps
00:01:59.17 are nice for transmitted light illumination, but they have two disadvantages. One is
00:02:05.08 that as you see, it takes quite a bit of time for the light to come on. It doesn't
00:02:10.29 switch on momentarily, and the other thing is it doesn't get super
00:02:15.04 bright. And for things like fluorescence, we really want brighter light sources.
00:02:20.05 So, a light source that has been used for many, many years in fluorescence microscopy
00:02:27.16 is this mercury arc lamp. This is the bulb, and in this bulb, there is an anode and a
00:02:37.14 cathode, and a very high voltage is being put over this such that it forms
00:02:43.13 an arc. Just the same thing as when you're welding, which of course everyone
00:02:48.23 does in their spare time. And this arc is super, super bright. That arc is
00:02:56.13 then projected so that the light goes in every direction through a condenser
00:03:02.01 lens it reaches our microscope. Also, inside this lamp house, there's often a mirror,
00:03:08.03 a parabolic mirror and that reflects the light going into the back direction
00:03:13.04 so that it comes out in the front. So you get more light coming out.
00:03:16.12 So this is a mercury arc lamp. We don't like them that much anymore
00:03:24.01 and that is because you have to replace them after about 200 hours.
00:03:27.18 Also when these things break, they're a big hazard. Immediately
00:03:32.13 evacuate the room if that happens. And they're kind of a pain to
00:03:36.29 align. You have to set them up so that this arc is positioned in a right
00:03:41.20 place, with respect to the condenser lens. So that the light goes
00:03:46.00 exactly through the optical path of the microscope. Therefore, little
00:03:51.08 boxes like this one here have become more and more popular. Here,
00:03:56.09 we have a so-called metal halide illuminator, it's also a lamp.
00:04:04.02 And that thing just clicks in here, there's no alignment that needs to be done.
00:04:09.12 The light is then delivered through this thing here, which is a liquid
00:04:15.06 light guide. So it's a tube that's filled with a liquid, something like water,
00:04:22.08 and the light is coupled in on this end and makes it all the way to the
00:04:27.28 end. So when I now assemble this and fire it up here.
00:04:38.14 Makes a lot of noise, takes some time. So one thing about these
00:04:44.26 lamps is that they don't like to be switched on and off very often.
00:04:49.14 So you know, once they're on, leave them on for at least an hour or so.
00:04:53.29 So when I now press the shutter, so that it opens, you see the light
00:04:58.16 coming out of this liquid light guide. The lamp needs to warm up a bit,
00:05:03.21 and it will become brighter and brighter over time. The light source
00:05:07.15 that is more and more replacing both the halogens and things like this
00:05:11.28 is an LED. And here I have one of those light emitting diodes. So
00:05:17.25 these things are really nice because you switch them on very, very rapidly,
00:05:23.03 there's no fans, much less heat production. And nowadays, they can
00:05:29.10 become very, very bright, as well. So often when you couple this into
00:05:35.10 the microscope, you will put a condenser lens in front of it. And you will get an assembly
00:05:40.03 something like this. And we have nice light of the wavelength that we're
00:05:44.20 interested in coming out of them. So these LEDS have defined colors, but
00:05:50.28 you can get multiples of them and combine them, and electronically
00:05:55.13 select which wavelength you would like to use.
00:05:59.14 Lastly, in quite a few microscopies, such a confocal and TIRF,
00:06:06.25 we use lasers. Lasers can look like this one here. So this is a
00:06:14.00 solid state laser. So as you know, a laser is really a narrow beam
00:06:19.07 of light coming out. And I'll switch this one on. So again, this takes
00:06:24.23 a little bit of time to warm up. Lasers, since they produce this very
00:06:29.28 narrow beam of light, you have to really watch out with them. You
00:06:34.16 don't want to get that beam of light hitting your eyeball ever.
00:06:38.27 This has a safety shutter here in the front, and so you can now see
00:06:43.25 this very bright spot of green laser light coming out.
00:06:48.06 Okay, that was the various types of light sources that we use
00:06:53.12 with microscopes.

This Talk
Speaker: Nico Stuurman
Audience:
  • Researcher
Recorded: April 2012
More Talks in Microscopy Series
All Talks in Microscopy Series

Talk Overview

Most light sources under the sun (sun included) can be used in microscopy. In this talk about light sources for microscopy, Nico Stuurman shows a few examples of light sources that are currently used in microscopes, including Halogen lamps, Metal Halide burners, LEDs, and lasers.

Speaker Bio

Nico Stuurman

Nico Stuurman

Nico Stuurman is a Research Specialist at the University of California, San Francisco, in the lab of Ron Vale. Nico combines his expertise in computer programming and microscopy to advance many projects including the Open Source software, Micro-Manager. Continue Reading

Playlist: Microscopy Series

Reader Interactions

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

iBiology and iBiology Courses are part of the Science Communication Lab (SCL). Our mission remains the same, to connect people to science. However, our focus has shifted to producing and evaluating cinematic films for education and the public, which you can find on the Science Communication Lab website. For more information, please see this blog post!